The PET18 locus of Saccharomyces cerevisiae: a complex locus containing multiple genes

The basis of pleiotropy shown by the pet18 mutants of Saccharomyces cerevisiae (rho-0,KIL-0 and temperature sensitive growth) was examined by cloning the fragment which complements the defect in growth at 37 degrees C of the pet18 mutants. The cloned DNA could complement the defect in the maintenance of the killer plasmid but did not give the cell the ability to maintain mitochondrial DNA. Sequence analysis of the cloned DNA revealed the presence of four open reading frames, at least two of which are necessary for the complementation activity. By using the cloned DNA as a probe, we found that two independent pet18 mutants have a deletion covering the entire sequence contained in the probe. From these results we predict that the traits of the pet18 mutants that concern temperature sensitivity and killer of the pet18 mutants are controlled by a separate gene(s) from that which participates in the maintenance of mitochondrial DNA.     

色织亚麻金线提花织物的研制与开发

文章论述了色织亚麻金线提花织物的特点,介绍了在生产实践中采用低张力络筒和低速度整经等工艺技术,开发出的产品滑爽、挺括、透气,立体感强,是一种良好的装饰和服装用纺织流行面料。     

膜结构裁剪膜片展开的二次测地线法

本首先对目前应用较广的膜结构裁剪方法，即裁剪线生成与图形展开的方法进行了比较研究，并在此基础上提出了一种新的裁剪方法——二次测地线法．通过对有理论解算例的分析及对不同形式的膜结构进行裁剪，验证了本方法的正确性、可靠性及广泛适用性．     

Two-stage fatigue loading of woven carbon fibre reinforced laminates

A brief review of the models used to predict the cumulative fatigue damage in FRP composites is presented. Two‐stage fatigue loading of a [0/90,± 45₂,0/90]_s quasi‐ isotropic woven carbon fibre/epoxy resin laminate was evaluated at stress ratio R = 0.05 and the failure mechanisms investigated using x‐radiography after each loading stage. The results are presented in terms of fatigue strength and damage growth and are compared with those in the literature. A low‐to‐high loading sequence is more damaging than a high‐to‐low one and the Palmgren‐Miner linear damage rule may no longer be valid for this kind of material, as previously reported.     

织物-树脂复合材料层压板的准静态侵彻机理

本文利用MTS得到了芳纶和高强维纶织物复合材料层压板受尖头侵彻体穿孔的准静态侵彻曲线 ,比较和分析了不同类型纤维集合体与热固性树脂和热塑性树脂复合材料的破坏模式 ,并考察了芳纶织物复合材料层压板侵彻的逐步破坏过程 ,揭示了复合材料层压板的准静态侵彻机理。     

含两种不同共聚组分改性聚酯的结晶速率

添加己二酸、间苯二甲酸,聚乙二醇对PET进行改性,合成样品。用DSC法研究合成共聚物的等温结晶动力学。结果表明,在所选择的温度范围内,共聚物很好的符合Avrami方程。随温度的升高,共聚物的结晶速度常数K和Avrami指数n逐渐减小,结晶速度G逐渐降低。含2种柔性组分的共聚酯随着一种柔性组分含量的增加,结晶速率G上升;含一种刚性一种柔性组分的共聚酯随刚性组分含量的增加,结晶速率G下降。     

有色高收缩涤纶毛条的研制

就生产有色高收缩涤纶毛条的工艺路线进行了比较．从主要纺丝工艺对收缩性的影响优选了物理改性祛的生产工艺，研制了满足精纺要求的有色高收缩涤纶毛条．     

提花织物意匠和纹板CAM系统

CAM系统的研制是从国情出发,保持传统产品特点和工艺要求,能适应多品种多规格的需要,有使用方便和通用性强的优点,并且在小样彩色图案的输入和识别处理、意匠过程中顺势间丝、影光、泥地处理等难题上有突破性发展,达到了实用要求。     

真丝纬编织物的品种开发

真丝针织物的品种花色单调已严重影响和制约其扩大出口创汇及生产企业的经济效益及发展。认为主要是品种开发与市场需求脱节,未能掌握国际市场导向指导消费,以及生产技术素质和管理能力不足。文章提出了开发真丝纬编织物的基本原则和目前可行的开发品种。     

平纹织物复合材料的弹性模量预测

利用细观力学的代表体积元(RVE)法,预测了平纹织物复合材料的弹性模量。建立了表征RVE形态的数学模型,分析了细观结构与宏观性能之间的关系,编制了从组分材料的弹性性能推测复合材料的弹性性能的预测程序。对理论预测进行了实验验证,理论值与实测值在一定误差范围内能较好吻合,说明此预测方法具有一定的可靠性。